Fractional Skin Resurfacing in Toronto

Lucie Mé · Endymed FSR · Skin Resurfacing

Fractional Skin Resurfacing in Toronto

Endymed FSR is for wrinkles, acne scarring, and rough skin texture. Treatment is available at our Yorkville and Fairview Mall clinics.

Book a consultation
How FSR works on the skin.

The treatment

How FSR works on the skin.

Fractional skin resurfacing removes the surface of the skin in a grid of tiny points and leaves the skin between those points as it is. New skin grows in at each point. You may have very small crusting where those points are healing, and EndyMed, the company that makes the system we use, says it disappears after three to five days.

In the same pass, radio frequency heats the skin underneath. The 3DEEP system reaches the dermis, the layer where collagen is made, and brings it to between 52 and 55 degrees Celsius with little heat in the surface above it. At that temperature the skin starts producing collagen again, and EndyMed states that the improvement carries on for three months after the last treatment of a course.

A medically trained professional sets how deep the points go and how much heat goes into the dermis, so the settings match the area being treated. The applicator reaches 2.9mm into the skin, and EndyMed gives that as the deepest reach of any fractional radio frequency device. FSR is safe for all skin types and colours.

What FSR treats

What fractional resurfacing is for

FSR works on the surface of the skin and on the dermis beneath it in the same pass. It is used for wrinkles, for scarring and for the texture of the skin. FSR suits areas of delicate skin, because how much of the surface comes away and how much heat goes into the dermis are set separately, so a lighter setting can be used where the skin is thin.

01Wrinkles
02Acne scarring
03Traumatic scars
04Rough skin texture
05Loose skin
06Delicate skin around the eyes and mouth

What to expect

From consultation to result

01

The consultation

Your first consultation and skin analysis at Lucie Mé are complimentary. A medically trained professional looks at your skin, talks through what is realistic for the lines, the scarring or the texture you want treated, and explains the settings they would use and how many treatments it would take.

02

The treatment

The appointment itself is straightforward. We set the depth and the coverage for your skin first, then work across the area in sections, each pass putting a grid of tiny points into the surface and heat into the dermis beneath it. EndyMed says most patients have three treatments, one a month for three months.

03

Afterwards

The treated points heal as very small crusting, and EndyMed says it disappears after three to five days and describes its fractional treatments as having minimal downtime. Your skin then carries on improving for three months after the last treatment of the course, as the collagen the heat started keeps building.

EndyMed 3DEEP

The technology

EndyMed 3DEEP

3DEEP sends radio frequency into the skin from several sources at once. The energy reaches the dermis and brings it to between 52 and 55 degrees Celsius, with little heat in the epidermis above it. Monopolar and bipolar radio frequency work closer to the surface. 3DEEP keeps the energy in the dermis, and the skin needs no cooling during treatment.

The system reads the skin's electrical resistance while it works and adjusts the energy to the resistance it reads. EndyMed states that more than 40 independent clinical studies have tested its fractional treatments. We use the same EndyMed Pro platform at both clinics for RF skin tightening and for RF microneedling with the Intensif.

Results

Before and after fractional resurfacing

Before and after fractional resurfacing Before
Before and after fractional resurfacing After

Acne scarring

Before and after fractional resurfacing Before
Before and after fractional resurfacing After

Acne scarring

Before and after fractional resurfacing Before
Before and after fractional resurfacing After

Wrinkles around the mouth

Before and after fractional resurfacing Before
Before and after fractional resurfacing After

Wrinkles around the mouth

Individual results vary. Results depend on the treatment, your skin, and how your body responds; the gallery shows the range of outcomes these treatments can achieve.

Common questions

What people ask about FSR

What is EndyMed FSR?

FSR stands for fractional skin resurfacing, and it is one of the applicators of the EndyMed Pro. It treats the skin on two levels in one pass. At the surface, it removes the skin in a grid of tiny points and leaves the skin between those points as it is, and new skin grows in at each point. Underneath, 3DEEP radio frequency reaches the dermis, where collagen is made, and brings it to between 52 and 55 degrees Celsius with little heat in the surface above it. That is the temperature at which the skin starts producing collagen again, and EndyMed states that the improvement carries on for three months after the last treatment of a course. How much of the surface comes away and how much heat goes into the dermis are set separately, so the settings can be matched to the area being treated. The applicator reaches 2.9mm into the skin, and EndyMed states that it has the largest variable treatment area in the industry. FSR is used for wrinkles, for scarring, for skin tightening and for resurfacing, and it is safe for all skin types and colours.

How is FSR different from RF microneedling with the Intensif?

Both applicators run on the same EndyMed Pro, and both heat the dermis with 3DEEP radio frequency. The Intensif sends radio frequency into the dermis down an array of 25 gold-plated needles, each 300 microns thin. The needles pass through the surface and take nothing away from it, they need fewer passes over an area, and there is no bleeding or bruising. EndyMed states you can return to your daily routine the day after an Intensif treatment. Skin carries on improving for up to a year after the last Intensif session. FSR removes the surface of the skin in a grid of tiny points. The skin you can see changes as well as the dermis beneath it, and EndyMed says you may have very small crusting for three to five days. EndyMed also has a combination protocol that uses both applicators, FSR for the resurfacing and the Intensif for deep wrinkle reduction. Which of the two suits your skin, or whether both do, is settled at your complimentary consultation and skin analysis.

What is the recovery after FSR?

The treated points heal as very small crusting, and EndyMed says it disappears after three to five days. The points sit in a grid across the area rather than covering it, because a pass treats part of the surface and leaves the skin in between as it is. How much of the surface comes away and how much heat goes into the dermis are set for each area before the pass begins. EndyMed describes its fractional treatments as having minimal downtime.

How many FSR treatments will I need?

The protocol is a series of three treatments, one a month for three months, and EndyMed says most patients have that course. The improvement carries on for three months after the last treatment, and EndyMed describes the results of FSR as both immediate and long-term. The improvement becomes more visible as the treatments of a course progress. What your own skin needs is settled at the complimentary consultation and skin analysis, where a medically trained professional looks at the area and says what FSR can do for it. Where deep wrinkles are part of what you want treated, EndyMed has a combination protocol that uses FSR for the resurfacing and the Intensif for the wrinkles.

How much does fractional skin resurfacing cost in Toronto?

The price depends on the size of the area treated, the settings your skin needs, whether FSR is given on its own or alongside the Intensif, and whether you are buying a single treatment or a course of three. At Lucie Mé, the price for the areas you want treated is discussed at the complimentary consultation, after the skin analysis. Financing is available through Beautifi over six to twelve months with no credit check. To ask about FSR, phone, text or email either clinic: Yorkville in the Holt Renfrew Centre on (416) 637-7377, or Fairview Mall in North York on (416) 492-6111.

Come in for a complimentary consultation.

Two clinics in Toronto

Where to have this treatment

Where to have this treatment

Yorkville

Fractional skin resurfacing in Yorkville at the Holt Renfrew Centre.

Holt Renfrew Centre, 50 Bloor Street West, Unit C10

(416) 637-7377

Where to have this treatment

North York

Fractional skin resurfacing in North York at Fairview Mall, direct from Don Mills station.

CF Fairview Mall, 1800 Sheppard Avenue East

(416) 492-6111